Core equipment-Shenzhen Xunjiexing Technology Corp. Ltd

emily@jxpcb.com Consultation

Stock code：688655

Equipment

Contact

CONTACT

G-I Building, Shasi Dongbao Industrial Zone, Shajing Town, Baoan District, Shenzhen, China

0755-3365 3366

Complaints Te: 13025457849

emily@jxpcb.com

Home » Customer Stories» Core equipment

DES Line： Developing+Etching+Stripping(dry film) line mainly handles with Thin Core (0.05mm) and fine trace (2.5mil) PCB fabrication.

OPE Machine： Control the offset of inner layer, high precise tolerance: +/-0.05 mil.

X-Ray： Check the inner layer circuit after pressing for Multi Layer.

In circuit board hole, huang hole can use resin to vacuum plug hole.

Collimated Exposure Machine： Very stable parallel light source, ensure the product quality has trace space less than 3mil.

Pumice Scrubbing Machine： Pre-treatment before solder mask, strengthen adhesive ability between solder mask and PCB board surface to avoid solder mask peel off or bubbling after high temperature operation in assembly process.

AOI： Inspect inner layer trace: nick, short and open which can not be detected by E-Test.

Auto V-Cut Unit： Tolerance +/- .005mm, Board thickness 0.3-3.0mm, can handle with jump-scoring requirement.

Common 8 Article Information

About: Introduction; Corporate culture; Honor; Partners; History; Employee

Products: CT; Security; Medicals; Aerospace; Automotive; Computer; Telecom munications

News: Company news; Industry news; Special column; Success story

Contact

Copyright © Shenzhen Xunjiexing Technology Corp. Ltd. All rights reserved 粤ICP备12031368号粤公网安备 44030602002472号 Technical: ctmon

TOP
Consultation
Mobile station

attention