Service support
Contact
CONTACTG-I Building, Shasi Dongbao Industrial Zone, Shajing Town, Baoan District, Shenzhen, China
0755-3365 3366
Complaints Te: 13025457849
Capability:
Monthly output Capacity: 5,000 sqM for Multilayer
Layer Count: 2-30 Layers
Products Type:
HF (High Frequency) & RF (Radio Frequency) board, Impedance controlled board ,
HDI board, BGA & Fine Pitch board, Heavy Copper board ( up to 7 OZ)
Material:
Laminate: FR4 (SHENGYI S1141)
HF material: Rogers, Taconic, Arlon
High TG material: SHENGYI / S1170, ITEQ / IT180 and related PP
Halogen Free material: SHENGYI / S1155 / S1165
Solder Mask: Taiyo PSR 2000/4000
Plating Chemistry: ROHM & HASS
Surface Finish:
Leaded HAL, Lead free HAL, ENIG, OSP (Entek), Immersion Tin,
Immersion Silver, Hard Gold(50u")
Selective Surface Treatment:
ENIG + OSP, ENIG + Gold Fingers, Immersion Silver + Gold Fingers,
Immersion Tin + Gold Fingers
Technical Specification
Min. Trace Width/Space: 3/3mil (outer layer, finished copper 30um), 2.5/2.5mil(inner layer, 1/3 or 1/2 OZ)
Min. Hole Size: 0.15mm/6mil (mechanical drill), 0.1mm/4mil (laser drill)
Min. Annular Ring: 4mil
Min. Distance Between Layers: 2mil
Max. Finished Copper Thickness: 7 OZ
Max. Finished Board Size: 600X800mm / 23.5"*32.5"
Finished Board Thickness: Double Sided: 0.2-7.0mm / 0.008"-0.28", Multilayer: 0.40-7.0 mm / 0.016"-0.28",
Min. Solder Mask Bridge: ≥0.08mm
Aspect ratio: 16:1
Plugging Vias Capability: 0.2-0.8mm
Tolerance :
Plated holes Tolerance: ±0.075mm (min.±0.05)
Non-plated hole tolerance: ±0.05mm (min+0/-0.05mm or +0.05/-0mm)
Outline Tolerance: ±0.1mm(mils±0.05-0.075mm)
Functional Test:
Insulation Resistance: 50 ohms (standard)
Peel Off Strength: 1.4N/mm
Thermal Shock Test: 280 degrees F, 20 seconds
Solder Mask Hardness: ≥6H
E-Test Voltage: 10V-250V
Warp and Twist: ≤0.7%
Certification:
Ts16949 Certificate (military Approved Certificate)
分享到:
Mobile station
attention